Monday, June 2, 2008

Welcome to another update from OEMCameras.com! This month we would like to introduce two new cameras to you, and include information on the exciting new OEM components.

"Upgraded Addition"

We are glad to introduce the new RHPC-890A/895A as the upgraded version of the 790B/795B. This brand new camera presents a smaller form factor in a single board platform than the 790B/795B.

While compacting the power of the high resolution 790 into a single board form factor, we've still managed to keep features such as: 4X digital zoom, 0.5 lux rating, Y/C (S-Video) and Composite video output, and a wide voltage range of 10.5 to 15 Volts DC.

OEMCameras.com would also like to introduce the new RHPC-600. This camera is a high resolution monochrome camera that displays an extremely sharp image with 600 TV lines of resolution at a sensitivity of 0.02 Lux / F2.0.

With a 1/3" SONY EXview HAD™ Monochrome CCD, 30x30mm board foot print, and 12Volt DC operation, this camera is our smallest and most powerful monochrome camera to date.

"Compact Components"

New to OemCameras.com are accessories and add-ons designed to improve or condition the video transmission of your camera. First, take a look at our OEM Image Stabilizer. This unit can digitally stabilize shaky and unsteady analog video either live or pre-recorded. THE RHP-IS-OEM is great for UAV applications, or it can be used on pole mounted cameras, towers, or vehicles that shake. The video can easily be stabilized using the RHP-IS-OEM.

For users looking to transmit their video over the web, we're introducing a high end OEM IP Video Server. Designed for migrating existing analog video into high-performance IP transmission, this board serves to convert analog video into a digital signal to follow the digital age. Featuring Motion JPEG, and MPEG4 compression, Two-way Audio, and HTTPS encryption. See the RHP-IPVS-OEM for more details.

Previously we featured an interface board that allows easy integration and control of either block camera. This time around we're making it even easier to access your video. The S-Video output is on a seperate 4 pin connector directly on the camera.

Previously the only way to connect to either the 35X or the 10X was via Ribbon Cable. We've made a compact board (RHP-OEMIO-01-KIT) that allows you connect to the video and data communication via Flying Leads.