1/3" High Resolution Analog Color Board Camera

The RHPC-890A/895A is a high resolution board camera that provides excellent color video and has extra functions controllable via PC Software.

The RHPC-890A is the replacement for our RHPC-790B-795B. This camera presents a smaller form factor in a single board platform.

This 42 x 42mm Board Camera works using a 10.5 - 15 Volt DC connection for operation.

• 1/3" Color CCD
• 42 x 42mm Single Board
• Y/C (S-Video) & Composite Output
• Internal & External Synchronization
• 10.5 - 15 Volt DC Operation
• 0.5 Lux Sensitivity
• 4X Digital Zoom

Various Parameters and Settings are Controllable Via: Software and Resistive Jumpers (See Notes)

• Gain
• Shutter Speed
• White Balance
• 4X Digital Zoom
• Back Light Compensation
• External Synchronization
• Phase Adjustment

Quick Specifications

	RHPC-890A (NTSC)	RHPC-895A (PAL)
Image Sensor	1/3" Inter-line Type CCD Image Sensor
Pixels	768(H) x 494(V)	N/A
Video Out	1) VBS: 1.0Vp-p (Sync Negative Ω Unbalanced) 2) Y/C Separate Y: 1.0Vp-p (Sync Negative Ω Unbalanced) C: To be Determined by Burst Level
External Sync	1) VS / VBS or SYNC 2) HD / VD * Input Impedance 4.7K Ω. Available 75Ω by JP
Horizontal Resolution	450 TV Lines (Condition: Luminance Signal) * Luminance Signal Only
Minimum Illumination	0.5 Lux or less at F1.4, AGC ON (Standard +39dB) (A_AGC = +24dB and D_AGC = + 15dB Total +39dB) <Referece value by Aperature/Signal level> Aperature at 50% at 30% F1.2 0.37 Lux. 0.23 Lux. F1.4 0.5 Lux. 0.3 Lux. F3.0 2.3 Lux. 1.38 Lux. * At Signal Level 50% (A_AGC: ANALOG_AGC - D_AGC: DIGITAL_AGC)
Sensitivity	2000 Lux F5.6 Equivalent * 706nit (3200°K)
S/N Ratio	48dB at Aperature=OFF; γ=OFF; Gain=0dB, Measuring band width from 100KHz to 5.2MHz * S/N Meter Setting: SC TRAP ON
AGC	OFF / ON / Other (Standard: ON) * Setting by R/C, or JP Resistor
Elec. Shutter	OFF / FL / EI / Other (ON/Auto Select by S/W) * Setting by R/C, or JP Resistor
White Balance	3200 / 5600 / ATW / Other (Standard: ATW) * Setting by R/C, or JP Resistor
Lens Mount	Without Lens or D-mount Lens * Standard f=56mm F3
Standard Color Temperature	3200°K +/- 50°K for Adjustment
White Clip Level	120 +/- 8 IRE
Setup Level	5 +/- IRE * AGC OFF
SYNC Level & Burst Level	40 +/- 4 IRE
SYNC Signal Frequency	15.73426KHz +/- 12ppm * Including Temperature Characteristic Tolerance
Sub-carrier Frequency	3.579545 +/- 12ppm * Including Temperature Characteristic Tolerance
Gamma Characteristic	Approx. 0.45
Power Requirement	DC +10.5V to +15V
Power Consumption	Max. 1.6W at Vin=DC 12V
Operation Temperature	Performance Guarantee: 0° to +40°C  * (Humidity 20-80% without Condensation) Operation Guarantee: -5° to +50°C  * (Humidity 20-80% without Condensation)
Storage Temperature	-25° to +60°C  * (Humidity 20-80% without Condensation)
External Dimensions	42 x 42mm
Weight	Approx. 13g (Without Lens)