Imaging Source DMK 22BUC03 Monochrome Camera
- USB 2.0 Monochrome
- 1/3″ Micron CMOS
- Global Shutter
- 744×480 Resolution
- Up to 76fps
- Trigger Input + I/O
Imaging Source DMK 22BUC03 Monochrome Camera
High Quality, High Frame Rate, Cost Effective, Power house
The DMK 22BUC03 camera is a high quality USB 2.0 CMOS Monochrome Camera with Trigger Input at an unbelievably low cost. With resolutions from 320×240 to 744×480, the DMK-22BUC03 camera can provide great detail in every image with its Progressive Scan CMOS CCD image sensor. Frame rates can reach up to 200 frames per second at 320×240 and up to 60 frames per second at the highest resolution of 744×480.
With an amazingly compact 36(H) x 36(W) x 25(L)mm form factor, this cost effective Megapixel USB camera is one of the best cameras you will find. Drivers and Software are included with this camera. Please note, lens is not included.
System Requirements
- Pentium III/800 MHz, 128 MB of Ram
- Graphics Card with 24/32 bit Color
- Windows XP, Vista (32 & 64 bit) or Windows 7 (32 & 64 bit)
- DirectX 9.0c or Higher
Resolution | Format | Frames Per Second | Sensitivity |
320×240 (Y800) | 1/3″ | 200 | 4.8 V/lux-sec |
640×480 (Y800) | 1/3″ | 90 | 4.8 V/lux-sec |
744×480 (Y800) | 1/3″ | 60 | 4.8 V/lux-sec |
* Configurable with the shipped software |
Dynamic Range | |
---|---|
Video Format | |
IR-Cut Filter |
No |
Sensor Type | |
Sensor Specification |
onsemi MT9V024 |
Shutter | |
Format | |
Pixel Size | |
MP |
0.4 MP |
Resolution | |
FPS |
76 FPS |
Mono/Color |
Monochrome |
Lens Mount | |
Interface | |
Supply Voltage |
4.5 VDC to 5.5 VDC |
Current Consumption |
Approx. 250 mA @ 5 VDC |
Auto Iris Control |
No |
Trigger | |
I/O | |
Dimensions (H x W x L) | |
Mass | |
Adjustable Shutter |
1/10000 s to 1/4 s |
Gain | |
Temperature (Operating) | |
Temperature (Storage) | |
Humidity (Operating) |
20 % to 80 % (non-condensing) |
Humidity (Storage) |
20 % to 95 % (non-condensing) |