Teledyne FLIR D48E Pan-Tilt Motion Control System
- Payload Capacity: up to 15 lbs.
- Pan Range: +/- 175°
- Tilt Range: +30° / -90°
- Accuracy: 0.003° Tilt / 0.006 Pan
- Voltage: 12-30 VDC
- Weight: 12 lbs
- Ethernet RS-232 & RS-485
- IP67 Rated
We usually have a majority of these items in stock.
Please call or contact us for availability.
FLIR PTU-D48E
PAN/TILT UNIT FOR SIDE-MOUNTED PAYLOADS UP TO 15 LBS
The PTU-D48 E-Series supports any type of single or multi-part payload through a flexible bracketing system of top and/or side mounting. The real-time command interface supports advanced applications such as video tracking. The PTU-D48 E-Series has been proven in a wide range of mission-critical applications for positioning of cameras, lasers, antennas, or other instruments in both fixed and mobile environments. It is designed for high duty cycles and reliable operation 24/7 in harsh all-weather environments.
HIGH PERFORMANCE WITH HEFTY PAYLOADS
With payload capacity up to 15 pounds and precise positioning, D48 pan/tilts have a wide range of pan speeds for smooth, precise control.
RUGGED PRECISION POINTING
Precise, real-time control of position, speed, and acceleration — plus a rigid worm gear design — provides steady positioning in windy environments and vehicle-mounted applications.
POWERFUL PERFORMANCE
With integrated Ethernet and Web interfaces, increased command rates, reduced jitter, and advanced microstep control, D48 pan/tilts provide advanced performance.
TOP MOUNTING BRACKETS (TMB)
TOP PAYLOAD CAPACITY
SIDE MOUNTING BRACKETS (SMB)
SIDE PAYLOAD CAPACITY
TOTAL PAYLOAD CAPACITY
| Pan Resolution | |
|---|---|
| Tilt Resolution | |
| Input Voltage |
12-30 VDC unregulated (fastest performance and torque @ 30 VDC) |
| Power Consumption | |
| Payload Mounting | |
| Slipring | |
| Weight | |
| Interface Controls | |
| Wiring Configuration | |
| Operating Temperature | |
| Standards | |
| ECCN Code |
PTU-D48 E Series Configuration Options:
Bracket Mount
The PTU-D48E accepts payloads using top or side mounting. Side mounting offers the higher payload rating because it reduces tilt axis torque. The PTU-D48E itself can be mounted in any orientation; however, consideration should be given to gravity and torque effects depending on PTU orientation and payload mounting orientation and balance.
The D48 series model number appears as follows:
Top Mount
The PTU-D48E comes standard with a top-mount configuration and included top bracket.
Part number: D48E - SS - ___ - 000 - ___
Side Mount
In addition to the PTU-D48E with standard the standard top bracket, you may order one or two optional side-mount brackets.
These are available separately in the right column of the product page.
Slip Ring
The PTU-D48E may be ordered with an optional slip ring that allows continuous 360° pan rotation.
Part number: Part number: D48E - ___ - S_ - 000 - ___ (No Slip Ring)
Part number: Part number: D48E - __ -C_ - 000 -___ (With Slip Ring)
Payload Wiring
PTU D48E units equipped with an internal slip ring are available with internal pass through wiring, which provides a 19 pin MIL C 26402 female receptacle at the top of the PTU near the payload location to connect video, power, and other signals. (The mating connector is provided to facilitate cable construction if needed.) These signals then pass through the PTU, into the connector at the base of the unit, and the cable harness (if purchased). This option allows you to reduce the amount of external cables and eliminate potential damage to external cables.
- The payload receptacle contains lines for Video 1, Video 2, payload power, and general pass through lines.
- The base receptacle contains lines for Video 1, Video 2, payload power, general pass through lines, PTU control (RS 232, RS 485), and PTU power.
No Pass Through
The PTU D48E comes standard with no payload pass through wiring.
Part number: D48E-___ - _S - 000 - ___
PL01 Wiring
PL01 allows you to route signals to the payload via 10 dedicated conductors. A mating connector for cable construction is included.
Part Number: D48E - __ - _1 - 000 - __
PL02 Wiring
PL02 allows you to route signals to the payload via 13 dedicated conductors. A mating connector for cable construction is included.
Part Number: D48E- __ - _2 - 000 -__
PL17 Wiring
PL17 gives you the maximum number of conductors for signals to be routed from the base of the pan tilt to the payload connector. A mating connector for cable construction is included.
Part Number: D48E - __ - _Q - 000 - __
- PTU-5
- D48E
- D100E-EX*
- D300E
- D300E-HS
- D300E-EX
Mounting Options |
PTU-5
|
D48E
|
D100E-EX*
|
D300E
|
D300E-HS
|
D300E-EX
|
Top Mounting Brackets (TMB) |
Included | TMB incl. w/ D48E-SS No TMB PN: D48E-SN | TMB not incl. w/ D100E-SS TMB PTU PN: D100E-ST | Top Bracket not incl. w/ D300E-SS Top Bracket PTU PN: D300E-SD | Top Bracket not incl. w/ D300E-SS Top Bracket PTU PN: D300E-SD | Top Bracket not incl. w/ D300E-SS Top Bracket PTU PN: D300E-SD |
Top Payload Capacity |
5 lbs / 2.2 kg | 10 lbs / 4.5 kg | 25 lbs / 11.4 kg | 35 lbs / 15.9 kg | 25 lbs / 11.3 kg | 60 lbs / 27.2 kg |
Side Mounting Brackets (SMB) |
1 or 2 SMBs can be purchased & installed | 1 or 2 SMBs can be purchased & installed | 1 or 2 SMBs can be purchased & installed | Only 1 SMB can be installed on the standard D300E-SS 1 or 2 SMBs can be installed on the D300E-SD | Only 1 SMB can be installed on the standard D300E-SS 1 or 2 SMBs can be installed on the D300E-SD | Only 1 SMB can be installed on the standard D300E-SS 1 or 2 SMBs can be installed on the D300E-SD |
Side Payload Capacity |
6 lbs / 2.7 kg | 15 lbs / 6.8 kg | 25 lbs / 11.4 kg | 70 lbs / 31.8 kg | 40 lbs / 18.1 kg\ | 90 lbs / 40.8 kg |
TOTAL PAYLOAD CAPACITY |
The combined weight of top and side payloads (if using both) cannot exceed the side payload capacity rating | The combined weight of top and side payloads (if using both) cannot exceed the side payload capacity rating | The combined weight of top and side payloads (if using both) cannot exceed the side payload capacity rating | The combined weight of top and side payloads (if using both) cannot exceed the side payload capacity rating | The combined weight of top and side payloads (if using both) cannot exceed the side payload capacity rating | The combined weight of top and side payloads (if using both) cannot exceed the side payload capacity rating |
BRACKET NOTES |
Top & side brackets cannot be used together -- the bracket clamp allows only one type at a time | - | D100E-ST bracket numbers are slightly different: D100-BKT-S | - | - | - |
| View | View | View | View | View | View |
