RHP Boson RC-HD-IF Remote Control Interface
Control the FLIR BOSON remotely with the “RC-HD-IF” Remote Control Interface.
- 6 to 26 Volts DC Input
- HD and Composite Outputs
- Reverse Polarity Protection
- Control w/RC Receiver
- USB Video Support
- S-Bus & PWM
- Compatible with most digital HDMI transmitters
- Setup and Calibration Software Included
- Weight: 12 grams
$499.00
We usually have a majority of these items in stock.
Please call or contact us for availability.
Description
Specifications
Downloads
Comparison
RHP-BOS-RC-HD-IF
Integrate the Teledyne FLIR Boson into your UAS.
The RHP BOSON RC-HD-IF REMOTE CONTROL INTERFACE is the perfect solution where HD thermal Video is needed. With 6 to 26 Volts DC input, HD and Composite outputs, and Reverse Polarity Protection, this interface is built for durability. Control the interface with an RC Receiver, enjoy USB Video Support, and take advantage of features like S-Bus & PWM compatibility and compatibility with most digital HDMI transmitters. Paired with the Setup and Calibration Software and a weight of only 12 grams, this interface is easy to install and perfect for any use case.
The RHP-BOS-RC-HD-IF is used to control the Boson camera remotely using a 16-channel S-Bus signal or up to 5 PWM signals from your wireless joystick remote control system. It allows for the assignment of available parameters on the Boson to any knob, switch, or lever on your remote controller, giving you the ability to adjust camera parameters on-the-fly. The module can accept a wide input voltage range of 6 to 26 Volts DC with reverse polarity protection while powering your Remote Control receiver with a regulated 5 Volts DC. It has both HD and composite video outputs, enabling it to connect to two separate video devices with no signal loss. With the HD video output, video signal can be transmitted securely through a video transmitter in 720 or 1080p, while the analog output makes it possible to connect to a recording device.
Customize and Save Configurations
Save configurations for different applications.
• Control via PC
• 16 Channels (S-Bus)
• 5 Channel PWM.
• 5 Channel D-Pad.
• Customize and Assign parameters.
Video Outputs
Output video signals to Analog and HD simultaneously.
• Composite Output
for use with analog transmitters.
• HD Output
use with the latest digital technology.
• Ideal for digital SD recording devices
Control the Boson Remotely
Assign any available parameter on the Boson for ‘on-the-fly’ control.
• Continuous Digital Zoom
• Color Palette Selection
• (FFC)Flat Field Correction
• (DDE)Digital Detail Enhancement
• Wired or Wireless control
| Digital Video Output | |
|---|---|
| MAVLink Interface | |
| Remote Control | |
| 10 Pin Accessory Port | |
| Micro - HD | |
| Input Voltage |
6-26VDC (14-PIN JST SVR Connector) 5.0 VDC USB-Micro Connector |
- RHP-BOS-RC-IF
- RHP-BOS-RC-HD-IF
- RHP-BOS DS-IF
Remote Control |
$399.00
RHP-BOS-RC-IF
|
$499.00
RHP-BOS-RC-HD-IF
|
$999.00
RHP-BOS DS-IF
|
Purpose |
Video, Power, Remote Operation | Video, Power, Remote Operation | Dual Camera Video, Power, Remote Operation |
Power |
5 to 26Volts DC Input | 5 to 26Volts DC Input +Multiple Power Inputs | 6 to 26 Volt DC Input |
Reverse Polarity Protected |
✓ | ✓ | ✓ |
Connection |
USB or TTL Communication | Master/Slave Sync Option +3.3V TTL/UART Control | Power Out (5Volts), PWM, S-Bus, MavLink |
Outputs |
2 Composite Video Outputs | HD and Composite Outputs | HD Video / USB |
Digital Video Output |
✓ | 1080p60 / 720p60 | 1080p60 / 720p60 |
RC Control |
✓ | ✓ | ✓ |
| RHP-BOS-RC-IF | RHP-BOS-RC-HD-IF | RHP-BOS DS-IF |
